Ph.D. Thesis Defense
Srujan Gubbi
(Faculty advisor: Professor Wenting Sun)
"Study of NOx Chemistry in Ammonia Combustion"
Monday, November 30
11:30 a.m. -1:30 p.m.
Food Processing Technology Building
(Auditorium 102)
Microsoft Teams Link
https://teams.microsoft.com/meet/286914426634747?p=qST2bQpFV1MR4qoGFO
Abstract:
The need for decarbonized energy has highlighted ammonia (NH3) as a hydrogen carrier and potential alternative fuel. However, using NH3 in combustion applications comes with other challenges, particularly high levels of NOx emissions due to the presence of fuel-bound nitrogen. Previous studies have proposed different strategies to reduce NOx emissions, such as flameless combustion and Rich-Quench-Lean (RQL). However, a majority of the effort has gone into computational modeling using existing NH3 kinetic models.
The present work aims to expand the current knowledge of NOx chemistry for NH3 combustion using combined modeling and experimental approaches. The modeling component uses reactor network modeling to determine the theoretical minimum NOx emissions from NH3 combustion for a staged combustion configuration using existing NH3 kinetic models. An optimization was done to determine values for design variables that will achieve minimum emissions, and the sensitivity of the minimum to firing temperature, pressure, residence time, and cracking fraction was explored. Results found that in an optimized configuration, NOx emissions are dominated by the main stage contribution, which initially peaks at very high values and then relaxes down to equilibrium levels. This NOx "relaxation" behavior was found to be key for reducing overall emissions. Higher main stage residence times were favored which allow NOx to relax further, followed by a quick secondary stage to consume any unburned fuel and limit second stage NOx production. Elevated pressures were found to significantly accelerate NOx relaxation, meaning low-NOx NH3 systems will need to operate at very high pressures. For pure NH3, minimum NOx were found to be below 25 ng/J (23 ppm) when operating at 20 bar. When cracking fraction was varied, minimum NOx was found to show a non-monotonic trend due to residence time limitations, and how they relate to peak NO values and NO relaxation time scales. Significant NOx reduction benefits were found when NH3 was cracked almost completely, as even small amounts of NH3 in the fuel can create a substantial NOx penalty. The sensitivity of these results to the choice of NH3 kinetic model was studied, and while a shift in values was observed, the overall trends with respect to design variables and operating conditions were found to remain the same.
The experimental component employed laser diagnostics in NH3 flames to conduct measurements on key species. Laser-induced fluorescence (LIF) was used to measure NO, NH, and NH2 in premixed Hencken burner flames and non-premixed counterflow burner flames. This work is the first to measure all three species in NH3 flame conditions, creating a unique and comprehensive dataset which can be used for further NH3 kinetic model validation. In premixed flames, the NO relaxation behavior discussed in the modeling component was measured and quantified, and low levels of H2 addition were found to increase NO. Measurements were compared to 1-D simulations using several existing kinetic models to evaluate their performance. Results found that NO predictions from models were significantly higher than measured values, particularly in the flame. Trends in NO and NH were also found to be opposite between measurement and simulation for counterflow flames as the flame temperature was varied. NO reaction sensitivity analysis was conducted using the NH3 kinetic models to identify reactions that may contribute to the agreement and discrepancies. Results suggest that NH and NH2 consumption of NO in the flame is not adequately modeled, which may lead to the overprediction of peak NO levels, and further tuning of the relevant reaction rate parameters is needed.
Committee:
Dr. Wenting Sun (advisor), School of Aerospace Engineering
Dr. Wenting Sun, School of Aerospace Engineering
Dr. Tim Lieuwen, School of Aerospace Engineering
Dr. Ben Emerson, School of Aerospace Engineering
Dr. Jerry Seitzman, School of Aerospace Engineering
Dr. Clinton Bedick, National Energy Technology Laboratory