Ph.D. Thesis Proposal
Luca Scifoni
(Faculty advisor: Professor Alvaro Romero-Calvo)
"Design, Modeling, and Integration of Electrodynamic Dust Shields for Lunar Dust Mitigation"
Tuesday, December 1
11:30 a.m.
ESM 108
Abstract:
Lunar dust adheres to and abrades exposed surfaces, degrades thermal, optical, and mechanical systems, and poses health risks to astronauts, and its mitigation is required for sustained surface operations. Mitigation technologies are either passive, such as coatings and surface textures that reduce adhesion without power, or active, such as mechanical, fluidal, and electrostatic methods that use energy to remove dust. The Electrodynamic Dust Shield (EDS) is an active technology that removes and repels dust without contact, using non-uniform electric fields generated by electrode arrays driven by high-voltage alternating signals. This PhD thesis advances the EDS from device to rover operation through three objectives. The first improves EDS performance by evaluating dielectric coating materials and electrode geometry under high vacuum and continuous dust deposition. Low-surface-energy coatings suppress micro-discharges on nanocomposite electrodes with a limited loss of efficiency and higher durability; reduced electrode width and spacing lower the voltage required for removal; and thermoplastic encapsulation extends the operating voltage threefold. The second objective determines the effect of the driving frequency, a parameter conventionally fixed at 10 Hz, on EDS performance for two- and three-phase devices of different geometries, supported by a particle-dynamics model whose contact and adhesion law is calibrated from the spatial response of particle populations. Preliminary results validate the calibration method against single-particle impact data and link the frequency dependence of performance to the contact dynamics of the grains. The third objective evaluates EDS devices on a rover exposed to dust generated by a second rover in a lunar analog testbed and relates the testbed conditions to lunar conditions. In the first static tests, the active device accumulates one quarter to one third of the dust collected by an unpowered control. The remaining work includes the calibration of the contact law for lunar regolith simulant, the frequency study, dynamic rover tests with different activation strategies, and the model relating analog tests to the lunar surface.
Committee:
Dr. Alvaro Romero-Calvo (advisor), School of Aerospace Engineering
Dr. Yashwanth Nakka, School of Aerospace Engineering
Dr. Meisha Shofner, School of Materials Science and Engineering